TANCA-2012 College List

CLICK HERE TO DOWNLOAD TANCA 2012 COLLEGE LIST

My Best Wishes to Students Attending TANCA Councling

Students are confused about M.E counselling. We would like to give some general advice to candidates who are going to attend M.E counselling.

Counselling:

Similar to B.E counselling, M.E counselling will also take place in the same way. Please be sure that you have all eligible certificates to attend counselling. Don’t involve in producing duplicate documents. The required documents will be

• 10th & 12the certificate*
• Degree certificate*
• Provisional certificate
• GATE scorecard / Tancet Score card
• Community certificate
• Mark sheets of all semester (If you miss any semester, don’t worry you can show the Consolidated mark sheet that you receive at final semester)
• Call letter + Acknowledgement card
• Tancet hallticket
• If PWD then Certificate of disability
• Nativity certificate

**Please retain photocopies of all the certificates mentioned

Also have Cash amount that is to be deposited at the time of admission. Among the certificates that have been mentioned above, only the Hall ticket(Tancet) and Score card will be submitted. Others will be verified and returned.

Process:

The sessions for your score will be informed in all leading newspapers and also through counselling call letters. Students will be called for seats more than available. The seats will be allocated according to your Rank-score basis. So there always exist heavy competition.

What college will i get for XX.XX score?

This is the question that is asked by all students. Well what we had said to the commentators was based on the methodology that was adopted till the previous year. Comparing with that detail we are able to predict the approximate position[college/course] that will be available to the students.Some of the students may or may not get the colleges that we had proposed. All it depends on time.

So what to do…?

First, list the colleges for your preference.Be sure to choose the best colleges first.List out minimum of 3 colleges at least that will be possible for your score.Refer your friends,relatives,neighbours and collect data about colleges – how they are in teaching, job oppurtunities etc.Then sortlist them according to your wish.Then sortlist the course in them.Choose wisely.

Simple Guidelines

Colleges:

Plan to select the best college rather than the best course. As already we mentioned "a simple course in a best reputed institutes is better than an excellent course in an average college"

Main advantage of choosing M.E degree is that you wll surely get a lecturer job any any engineering college.But to get a job in reputed institutions you must have studied in reputed institutes with high technical knowledge. So if you plan to go for "teaching profession" or to do Ph.D, then choose the college which is excellent in teaching with good teachers.

Course:

If you choose a different course that is not taken by most students,then you must have a clear idea of how you can excell in career.You must have the clear map of how to frame your future.

If you choose a regular course,you must have to excell in it.So what you have to do is that choose the best college & course for your score range.

Part-time courses : These category is best for job persons.Persons who will to do study along with job can choose this courses.

But the disadvantage of these courses is that these courses are not recognised as best as Fulltime courses. Also there is a disadvantage of long term (3 years for Part-time degree) & higher fees than the normal full-time students.

                                                        ALL THE BEST  to all

List of M.E courses for engineering disciplines

Civil engineering:

Eligibility: B.Tech/B.E in Civil, Chemical, Geoinformatics, Bio technology, Agricultural engineering, Irrigation Engg

1. Environmental Engineering
2. Structural Engineering
3. Hydrology and Water Resources Engineering
4. Transportation Engineering
5. Irrigation Water Management Engineering
6. Construction Engineering & management
7. Remote Sensing
8. Environmental Management
9. Geomatics
10. Integrated Water resources management
11. Costal Management ( Also eligible for EEE, ECE, Forestry, Fishery, Oceanography)
12. Infrastructure Engineering
13. Computer method & applications in structural engineering
14. Geo technical Engineering
15. Environmental engineering & management
16. Environmental sciences and engineering

MECHANICAL ENGINEERING

Eligibility: B.E/B.Tech in  Mechanical, Automobile, Manufacturing, Production, Aeronautical, Chemical, Industrial, Mechatronics, Marine)

1. Engineering design
2. Industrial engineering
3. Computer integrated manufacturing
4. Internal combustion engineering
5. Refrigeration & air conditioning engineering
6. Energy engineering ( Also Petroleum, Petro-Chemical engg, Energy& Environmental engg from Tamil nadu Agri univ.,CBE)
7. Product design and development
8. Computer aided design
9. Quality Engineering & management
10. Printing and packaging technology ( Also Polymer engg, plastic tech, rubber & plastic tech,Packaging Tech)
11. Mechatronics
12. Aeronautical Engineering
13. Manufacturing Engineering
14. Manufacturing systems management (Mining)
15. Automobile Engineering
16. CAD-CAM
17. Thermal Engineering
18. Industrial Safety Engineering
19. Welding Technology
20. Renewable Energy(Bio Tech, Industrial Bio tech)
21. Lean Manufacturing
22. Aviation Technology(ECE)
23. Quality Engineering
24. Product design and commerce
25. Industrial Metallurgy
26. Production Engineering
27. Heat power Engineering
28. Advanced manufacturing Technology
29. Energy conservation and management(EEE, Petro chem)
30. Aerospace technology
31. Solar energy
32. Automotive Engineering

ELECTRICAL ENGINEERING

Eligibility: EEE, ECE, E & I, I & C

1. Power systems engineering
2. High voltage engineering
3. Control & instrumentation
4. Power electronics drives
5. Electrical drives and embedded controls
6. Embedded system technologies (CS & IT)
7. Instrumentation engineering
8. Control systems
9. Embedded and real time systems (CS & IT)
10. Electrical machines

INFORMATION TECHNOLOGY & Communication

Eligiblity : IT, ECE,CSE)

1. Applied Electronics
2. Medical electronics ( Bio Medical, B.E Medical electronics)
3. Optical Communication
4. Communication systems
5. Computer science and engineering
6. Software Engineering (M.C.A or M.Sc -5 years Integrated, B.E Comp.hardware & software)
7. Laser & Electro optical (M.Sc Physics,Material science)
8. VLSI design
9. Multimedia technology
10. Information technology
11. Systems engineering & operations research ( B.E – Any branch, M.Sc ( Maths, Statistics), M.Sc-5 years CS,IT)
12. Bio Medical Engineering (B. E Any branch, M.Sc Physics)
13. Avionics ( Aero, M.Sc  Physics, CS – Min 2 years Experience in approved organization)
14. Communication & Networking
15. Computer and communication
16. Digital communication & network engg
17. Network Engg
18. Wireless Technologies
19. Space science and engg ( Mech , Aeronautical, M.Sc Physics)
20. Web & mobile technology
21. Satellite technology
22. Pervasive computing technologies
23. ECE
24. Mobile and pervasive technology.
25. Mainframe technology

OTHER COURSES:

FACULTY OF TECHNOLOGY

Chemical Engg : Chemical, Electro chemical, Pharmaceutical technology, Food technology, Food processing technology, petro chemical, Petroleum refining

Textile Technology: Textile technology, Textile chemistry

Ceramic technology: Chemical, Metallurgy, Ceramic & cement technology, Ceramic tech, Petro-engg , Petro.Chem,M.Sc Material Science

Petroleum refining & petro chemical : Chemical, Petroleum Refining, Petro chem, Petro-engg , M.Sc Petro.tech

Polymer Science & engineering : M.Sc. Polymer science, Material science,Applied chemistry,Chemistry or B.E/B.Tech Polymer, Chemical , Plastic, Textile

Environmental Science & Tech: B.E Civil, Geo informatics / Chemical, Industrial Biotech, Bio tech, Chemical & electro chemical engineering, Petro-chem, Petro engg , M.Sc ( Applied chemistry, Env.chemistry, Bio Tech) .B.Tech Energy & environmental engineering from Tamilnadu Agri univ.CBE

Bio Tech : Chem engg,Leather tech , Bio chemical engg, Petroleoum , Bio tech, Petro-chem, Agri-bio tech or B.Pharm , M.Sc Biochemistry, Microbiology, Genitic engg, Genitics & molecular biology

Bio-Pharmaceutical Technology: Chem, Bio-tech, Industrial Bio tech, Pharmaceutical, Bio-Medical, Bio-chemical, B.Pharm, M.Sc.Bioche, Microbiology, Genetic engineering, Genitics & molecular biology

Electro Chemical Engineering: B.Tech – Chem engg, Chem & electro chemical engg, Petro tech, Petro refining , Petro-chem or M.Sc Applied chemistry.

Leather Technology : B.E/B.Tech Leather technology

Footwear science & engineering: B.E/B.Tech Leather technology, Mech,Textile tech

Nano Science & Technology: Mech, ECE, Ceramic, Engineering Physics, Bio tech, Industrial Bio Tech, Chemical, Bio Medical, Agri Bio tech, B.Pharm, M.Sc- Physics,Material science, Applied chemistry,Bio technology(With maths as one subject in B.Sc)

Food Technology: Food technology, Bio tech, Pharm.tech, Chem Engg, Mechanical, Agri.tech or M.Sc – Food science , nutrition, Bio tech, Bio chemistry,Microbiology, Horticulture,Fisheries science.

Plastic Technology: Mach, Chem, Prod.engg,Polymer Engg, Petroleoum, Petro-refining or M.Sc Polymer science,Chemistry with polymer specilization.

Textile Tech : Textile tech, Textile chem, polymer , M.Sc Applied chemistry, Textile tech, Chemistry

Apparel tech:Fasion tech, textile tech, Leather Technology

M.Tech . Technology Management: B.E/B.Tech any branch

Rubber Tech: Rubber Tech, Plastic tech, Polymer tech,Mech, Chem,Material science& engg, Automobile, Prod.engg, M.Sc.Chem, Applied chem, polymer chem, material science

Polymer technology: Polymer,chemical texile, M.Sc. Polymer science, Material science, applied chemistry, Chemistry.

ARCHITECTURE & PLANNING

M.Arch.Landscape Architecture, M.E Digital Architecture, M.Arch : B.Arch

Real estate development: B.Arch or Civil engineering- subject to the condition that they will not be eligible for registration as architect under the act 1972 with the council of architecture, on the basis of their M.Arch (Real estate development)

M.Plan: B.Plan / B.Arch/ B.E.Civil or M.A/M.Sc ( Geography , economics, sociology, social work with community development specialization and rural development

The courses listed above and their eligibility can be changed by rules.So we request you verify again the eligibility criteria.

COUNCLING SCHEDULE FOR TANCA-2011

TANCA 2012 INFORMATION

INFORMATION & INSTRUCTION TO THE CANDIDATES-TANCA 2012

                                              Click here to Free Download Booklet

Originals to be Produced at the time of TANCA Councling

TANCA-2012 COUNCLING SCHEDULE

      

AnnauniversitySyllabus-M.E/M.TECH/MCA All Semester

M.C.A. (MASTER OF COMPUTER APPLICATIONS)------- Download Syllabus
M.E. CAD / CAM----------------------------------------------------- Download syllabus
M.E. APPLIED ELECTRONICS ----------------------------------  Download Syllabus
M.E. COMPUTER AIDED DESIGN--------------------------------Download syllabus
M.E. COMMUNICATION SYSTEMS------------------------------Download Syllabus
M.E.COMPUTER SCIENCE AND ENGINEERING--------------Download Syllabus
M.E. COMPUTER INTEGRATED MANUFACTURING---------Download Syllabus
M.E. CONSTRUCTION ENGINEERING AND MANAGEMENTDownload Syllabus
M.E. ENGINEERING DESIGN---------------------------------------Download Syllabus
M.E. EMBEDDED SYSTEM TECHNOLOGIES------------------Download Syllabus
M.E. NETWORK ENGINEERING-----------------------------------Download Syllabus
M.E. POWER ELECTRONICS AND DRIVES------------------- Download Syllabus
M.E. POWER SYSTEMS ENGINEERING------------------------ Download Syllabus
M.E. PRODUCT DESIGN & DEVELOPMENT-------------------Download Syllabus
M.E. SOFTWARE ENGINEERING----------------------------------Download Syllabus
M.E. MOBILE AND PERVASIVE COMPUTING-----------------Download Syllabus
M.E.STRUCTURAL ENGINEERING--------------------------------Download Syllabus
M.E. THERMAL ENGINEERING-------------------------------------Download Syllabus
M.E. VLSI DESIGN---------------------------------------------------- Download Syllabus
M.TECH. INFORMATION TECHNOLOGY-------------------------Download Syllabus
M.E. INTERNAL COMBUSTION ENGINEERING-----------------Download Syllabus

LIST OF COLLEGS PROVIDING M.E/CSE STREAM-TANCA2012 COUNCLING

ANNA UNIVERSITY-CEG CAMPUS
ANNA UNIVERSITY-CPT CAMPUS
Jaya engineering college
Magna college of engineering
Prathyusha institute of technology and management
RMD Engineering college

RMK Engineering college

S.A.Engineering college

Sriram Engineering college

Sri venkateswara college of engineering

Veltech multitech engineering college
Velammal college of engineering & technology
Gojan engineering college,perambur
Sams college of engineering and technology
Arignar anna institute of science & technology
DMI engineering college
Rajalakshmi engineering college
Rajiv gandhi college of engineering
S.K.R engineering college
Saveetha engineering college
Sree sastha institute of engineering and technology
Sri muthukumaran institute of technology
Sri venkateswara college of engineering sriperumbudur
P.B college of engineering
Alpha college of engineering.
Indira institute of engineering and technology
Anand institute of higher technology
Jerusalem engineering college
Misrimal engineering college
shree motilal kanhaiyalal fomra institute of technology
Sri sivasubramaniya nadar college of engineering
Agni college of technology
T.J institute of technology
Dhanalakshmi srinivasan college of engineering and technology
st.joseph college of engineering
Aksheyaa college of engineering
Chennai institute of technology
Adhiparasakthi college of engineering
Dhanalakshmi engineering college
Dr.pauls engineering college
g.k.m college of engineering and technology
IFET college of engineering
karpaga vinayaga college of engineering and technology
madha engineering college
shri andal alagar college of engineering
sri lakshmi ammal engineering college
sri sairam engineering college chennai
tagore engineering college chennai
valliammai engineering college
dhaanish ahmed engineering college
sri ramanujar engineering college
sri krishna engineering college chennai
PERI institute of technology

TANCA-2012 TOTAL NUMBER OF SEATS

BRANCH	TOTAL SEATS	AVAILABLE COLLEGS
CSE	1681	CLICK HERE
POWER ELECTRONICS & DRIVES	712	------------
POWER SYSTEMS ENGINEERING	254	------------
SOFTWARE ENGINEERING	150+25(SS)	------------
STRUCTURAL ENGINEERING	377+24(SS)	------------
THERMAL ENGINEERING	140+24(SS)	------------
VLSI DESIGN	673+25(SS)	------------
CAD/CAM	403	------------
BIO-TECHNOLOGY	112+25(SS)	------------
APPLIED ELECTRONICS	853	------------
COMMUNICATION SYSTEMS	493	------------
ENGINEERING DESIGN	350	------------
EMBEDDED SYSTEMS TECH	212	------------
EMBEDDED SYSTEMS	151	------------
IT	113+50(SS)	------------
MANUFACTURING ENGINEERING	241	------------

Bank Jobs

           

TANCET EBOOKS

TANCET EBOOKS FOR EEE

TANCET EBOOKS FOR EEE

AMPLITUDE MODULATION

ELECTROMAGNETICS PRACTICE SET

CIRCUIT THEOREMS

DISCRETE TIME SYSTEMS

COMPLEX VARIABLES

COMPLEX VARIABLES TESTPAPER

OPERATIONAL AMPLIFIERS

SIGNAL AND SYSTEMS

ELECTRONIC CIRCUITS

NUMBER SYSTEMS

SEMICONDUCTOR MOCKTEST

TRANSFER FUNCTIONS

TRANSMISSION LINES

CIRCUIT ANALYSIS-NETWORKTHEORY1

NETWORK THEORY-2

DIGITAL ELECTRONICS

ELECTRO MAGNETIC THEORY

SIGNALS AND SYSTEMS

PSTCL Hiring "Assistant Engineer/Junior Engineer" For B.E/B.Tech/Diplomo/B.Sc.LAST DATE:03/09/2012

COMPANY NAME :PSTCL

JOB FIELD :Core/tech/Govt

JOB POSITION :Assistant Engineer/Junior Engineer

LOCATION :Punjab

SALAER OFFERED :Rs.16650-39100/month 

QUALIFICATION : B.E/B.tech/Diplomo/B.sc/Others

EXPERIENCE :Freshers 

APPLICATION FEES :Rs.500(gen).Rs.200 (SC/ST/PED)

APPLY MODE :Online 

LAST DATE :03/09/2012 

For more Details Click Here 

To Apply Click Here 

Website http://www.pstcl.org

MPPKVVCL Hiring "ASSITENT ENGINEER/JUNIOR ENGINEER" For B.E/B.tech/Diplomo

COMPANY NAME :MPPKVVCL

JOB FIELD :core/tech/govt

JOB ROLE:ASSITENT ENGINEER/JUNIOR ENGINEER

LOCATION :Japalpur

SALAER OFFERED :Rs.26,000&Rs.15,000 

LAST DATE :28/08/2012 

QUALIFICATION :B.E/B.Tech/Diplomo

EXPERIENCE :Freshers/1 year

APPLICATION FEES:RS.360(Gen/UR)&Rs.60(SC/ST/PWD)

For More Details:Click Here(Assitant Engineer)

For More Details:Click Here(Junior Engineer)

To Apply Click Here

Website:http://www.mpez-electricity-discom.nic.in/

CSC Hiring "Associate Software Engineer" For B.E/B.tech/M.e/.tech/Others

CSC Hiring "Associate Software Engineer":

COMPANY NAME : CSC(COMPUTER SCIENCE CORPORATION)

JOB FIELD :IT/Software industry

JOB ROLE:Associate Software Engineer

LOCATION :Indore

SALAER OFFERED :Best in Industry

LAST DATE :ASAP

QUALIFICATION :B.E/B.Tech/M.E/M.tech/others

BATCH: Any Batch Passed out

EXPERIENCE :Freshers 

To Apply  Click Here

Website www.csc.com

3S Educare Hiring Software Engineer.Last Date:30/08/2012

3S Educare Hiring "Software Engineer".Last Date:30/08/2012:

Eligibility: BE/B.Tech((CSE), Information Science/Technology (IS/IT))

Location: Chennai

Hiring Process: Written-test, Face to Face Interview.

Job Description:

• Looking for Software Engineer.

Desired Candidate Profile:

• Candidate should have scored more than 65% throughout.

Note:

• Candidate 2011/2012 can apply.

Last Date:30/08/2012.

Click Here to Apply

CIMAP Recruitment 2012 – Technical Asst, Technician Vacancies:

CIMAP Recruitment 2012 – Technical Asst, Technician Vacancies:

Educational Qualification:First Class B.Sc/Diploma/ITI

Last Date for Receipt of Application: 14-09-2012

Click here for more details

Click here For Appliction

Comfyi Solution careers 2012:

Company Name: Comfyi Solution
Experience: 0-2 years
Education: UG-Any Graduate-Any Specialization, PG-Any PG Course-Any Specialization
Location: Chennai
Industry: IT Software, Software Services
Role: Software Developer
Key skills: PHP, Test, HTML, CSS, Database

Click Here to Apply

M.E/Power Electronics

M.E/Applied Electronics

M.E/Computer Science& Engineering

Tancet 2011

TANCET 2011 SYLLABUS

Sl. No.	Course	Duration of the Test	Syllabi
1.	M.B.A.	2 Hours	The question paper will have sections
			i.	To evaluate the candidate’s ability to identify critically the data and apply the data to business decisions from given typical business situations.
			ii.	To evaluate the skill of the candidate in answering questions based on the passages in the comprehension.
			iii.	To evaluate the skill on solving mathematical problems at graduate level (including those learnt in plus two or equivalent level).
			iv.	To test on determining data sufficiency for answering certain questions using the given data and the knowledge of Mathematics and use of day – to – day facts.
			v.	To test the knowledge on written English with questions on errors in usage, grammar, punctuation and the like.
2.	M.C.A.	2 Hours	The question paper will have the following sections:1) Quantitative Ability (ii) Analytical reasoning iii) Logical reasoning   (iv) Computer awareness A few questions may also be on verbal activity, basic science etc.
3.	M.E./ M.Tech.	2 Hours	The question paper will have three parts.Part-I and Part-II are compulsory and under Part-III the candidates have to choose any one section out of 14 depending upon his/her specialisation. The syllabi for the entrance test are furnished in the Annexure and the questions will be set at the undergraduate level.

Marking Scheme

Sl. No.	Course	No. of Questions	No. of alternative answers	Mark for every correct answer	Max. Marks	Negative marksfor every wrong answer	Remarks
1.	MBA	100	5	1	100	1/5	Multiple shading will be considered as wrong answer and 1/5 mark will be deducted.
2.	MCA	100	4	1	100	1/4	Multiple shading will be considered as wrong answer and 1/4 mark will be deducted.
3.	M.E./M.Tech.
	Part-I	30	4	1	30	1/4	Multiple shading will be considered as wrong answer and 1/4 mark will be deducted.
	Part-II	45	4	1	30	1/4	All the correct answers up to 30 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.Multiple shading will be considered as wrong answer and 1/4 mark will be deducted.
	Part-III	40/45	4	1	40	1/4	All the correct answers up to 40 will be awarded marks and all the wrong answers shall be taken into consideration for awarding negative marks.Multiple shading will be considered as wrong answer and 1/4 mark will be deducted.

SYLLABUS

PART – I

ENGINEERING MATHEMATICS (Common to all Candidates)

i)      Determinants and Matrices : Solving system of equations – Rank of the Matrix – Eigenvalues
and eigenvectors – Reduction of quadratic form to canonical form.

ii)     Calculus and Differential Equations : Partial derivatives – Jacobians – Taylor’s expansion -
Maxima and Minima. Linear ordinary differential equations with constant coefficients – Simultaneous first
order linear equations with constant coefficients. Formation of partial differential equation (PDE) -
Solution of first order PDE – Solution of linear higher order PDE with constant coefficients.

iii)  Vector Calculus : Double and triple integrations and their applications – Gradient, Divergence, Curl
and Laplacian – Green’s, Gauss divergence and Stroke’s theorem.

iv)  Functions of Complex Variables and Complex Integration : Analytic functions – Conformal
Mapping – Bilinear transformation – Cauchy’s integral theorem and integral formula – Taylor and Laurent
Series – Singularities – Residues – Residue theorem and its applications.

v)    Transforms : Laplace Transform – Inverse transforms – Application to solution of linear ordinary
differential equations with constant coefficients. Fourier integral theorem – Fourier transform pair – Sine
and Cosine transforms. -transform – Inverse Z-transform – Solution of difference equations using Z-
transform.

vi)      Numerical Methods : Solution of linear system by direct and iterative methods – Interpolation
and approximation – Numerical Differentiation and Integration – Solving Ordinary Differential Equations.

vii)        Applied Probability : Probability and Random variables – Standard Discrete and Continuous
distribution – Moments – Moment generating function and their properties. Two-Dimensional Random
Variables – Covariance – Correlation and Regression.

PART – II

BASIC ENGINEERING & SCIENCES (Common to all Candidates)

i)     Applied Mechanics : Law of Mechanics – Lame’s theorem – Forces, Moments and Couples -
Displacement, velocity and Acceleration – Friction – Moment of Inertia.

ii)   Mechanical Engineering : Laws of thermodynamics – Open and closed systems – Equation of state

-   Heat and Work.

iii)  Physics : Sound – Latices – Ultrasonic flaw detector – X-ray radiography – Interference Fringes -
Planck’s quantum theory – Laser and Fibre Optics.

iv)  Material Science : Fracture – Magnetic and Dielectric materials – Conductor and Semi conductor
materials – Ceramic and Super conductor materials.

v)    Civil Engineering : Fluid Statics and Dynamics – Boundary Layer – Pumps and Turbines -
Environmental Pollution.

vi)   Electrical Engineering : Ohm’s law – Kirchoff’s law – A.C. circuits – D.C. machines – Transformers

-   Synchronous machines – Instrumentation.

vii) Computers : Computer organization – Architecture – Arrays – Pointers – User defined function -
C program.

iii) Chemistry : Adsorption – Chromatography – Chemical kinetics – Electrochemistry – Spectroscopy -Fuels and Combustion.

PART – III

1. CIVIL ENGINEERING & GEO INFORMATICS

i)     Structural Engineering Division : Mechanics: Stress-Strain Relationships – Principal stresses and
Principal strain in two dimension and three dimension. Composite Bars – Composite Beams – Elastic
Constants. Beams and Bending – Shear Force and Bending Moment Diagrams – Flexural and Shear
Stresses. Slope and Deflection of Beams. Thin and Thick Cylinders. Torsion. Theories of Failure -
Unsymmetrical Bending – Curved Beams – Theories of Columns. Combined Direct and Bending Stresses.
Structural Analysis: Static and Kinematic Indeterminancy – Energy Principles – Deflection of pin jointed
plane frames – rigid frames. Classical Method of Analysis of indeterminate structures (Slope deflection
and Moment Distribution) – Matrix Method. Arches and Suspension Bridges – Influence Line for
Determinate and Indeterminate Structures. Plastic Analysis of Structures.

Building Materials: Cement – Concrete – properties of ingredients- Mix Design- Quality Control- Special

Concrete – Concreting Methods- Brick – Brick Masonry – Stone – Timber – Steel.

Concrete Structures: Design Methods – Limit State Design for beams, slabs, columns and footings -

retaining walls – Water Tanks. Prestressed Concrete – Principles – Methods – Losses – Deflection -

Design.

Steel Structures: Steel Sections – Connections – Design of Tension and Compression Members – Beams, Column Bases – Plate Girders and Trusses.

ii)         Soil Mechanics And Foundation Engineering : Soil Mechanics: Nature of soil – phase
relationships – Soil classification; Soil water – static pressure – effective stress principle; permeability -
seepage; Stress distribution in soil – Consolidation (Terzaghi’s one dimension consolidation theory);
Compaction shear strength of soil – Mohr – Coulomb theory – determination of shear strength by
different methods; Slope stability analysis – protection measures.

Foundation Engineering: Site investigation – scope and objectives – drilling techniques – depth and spacing of boreholes – sampling Techniques – penetration tests (SPT and SCPT) – plate load test -selection of foundation; Foundation types – shallow foundation – bearing capacity (Terzaghis Theory and BIS formula) – allowable bearing pressure – bearing capacity from field tests – settlement of foundation -allowable settlement – Codal provisions; Design of foundations – Isolated, combined and raft foundation; Pile foundations – static and dynamic pile driving formulae (Engineering News and Hiley method) – Pile groups – capacity and settlement – Codal provisions – pile load test – negative friction on piles; Earth pressure theories – Earth pressure on retaining walls – stability analysis of retaining wall.

iii)   Transportation Engineering : Highway Planning: Road Classification, Geometric Design of
Highways, Construction of Earth, WBM, Bituminous and concrete roads, Design of flexible and rigid
pavements. Drainage of roads, maintenance of roads.

Railways, Airways, Docks and Harbour Planning: Railway alignment, components of permanent way, geometric design Airport planning, components of airport, site selection, planning for terminal building, runways. Harbour planning, components of harbour, inland water transport. Traffic Engineering: Traffic characteristics, Traffic surveys, Traffic Signals, Road markings and signs.

iv)    Water Resources Engineering : Fluid Mechanics and Hydraulics: Properties of fluids. Fluid statics
and relative equilibrium. Basic concepts of fluid flow – kinematics and dynamics. Concept of system and
control volume application to continuity, momentum and energy equations. Dimensional analysis and
model studies. Laminar and turbulent flow through pipes. Boundary layers. Steady uniform and gradually
varied flow in open channels. Rapidly varied flows. Turbines and pumps and positive displacement
pumps.

Hydrology and Ground Water: Hydrometeorology. Hydrologic cycle. Precipitation and its measurements. Abstractions. Runoff estimation. Hydrograph analysis. Unit Hydrograph. Hydrologic extremes floods and droughts. Rainwater harvesting. Properties of aquifer. Groundwater development. GEC norms. Well hydraulics. Steady and unsteady flows. Ground water quality.

Irrigation Engineering: Irrigation system. National water policy. Components of irrigation network. Design of lined and unlined channels. Waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation. Soil water relations. Crop water requirements. Irrigation scheduling and methods. Duty, delta and base period. Irrigation water quality. Irrigation water management. Participatory approach.

v)   Environmental Engineering : Water and Waste water Engineering: Water requirements; water
demand, quality standards; Development of water supply source, conveyance system; basic unit
processes and operations for water treatment; water distribution; sewage characteristics; sewage
treatment, primary and secondary treatment of sewage, sludge disposal, sewage disposal.

Air Pollution and Control: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.

Noise Pollution and Control: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.

vi)  Surveying And Remote Sensing : Surveying: Chain survey-traversing-plotting: compasses-
bearings -plane table-leveling-bench marks-temporary and permanent adjustments-reduction: contouring
and volumes-theodolites – Gale’s table-lay out – setting out works-curve ranging-mine surveying-
techeometric survey-triangulation-base line-corrections-trigonometric leveling – errors and sources-
classification of errors-equation-level nets-astronomical survey-practical astronomy-photogrammetry-
EDM-hydrographic survey-river.

Electronic survey- infrared EDM-microwave system-modern positioning systems – trilateration. Remote Sensing: Satellite system- EMR interaction with each feature, spectral signature – image characters -interpretation keys- Image enhancement, filters, classification.-accuracy assessment-thematic maps.

GIS and Cartography: Cartography-map projection-map design-map compilation-generalization-map production- software and hardware GIS-data types-data base types-raster and vector-topology-data input-data analysis-DEM and TIN-data output-applications.

2. EARTH SCIENCES

i)     Physical Geology and Geomorphology : Weathering process, kinds, products. Internal structure
of the earth, fundamentals of plate tectonics. Landforms produced by River, winds, glacier and sea.
Drainage pattern, Drainage Index , geomorphic features.

ii)          Mineralogy, Petrology, Stratigraphy, Paleontology and Structural Geology : Physical
properties of Industrial minerals classification, origin and description of Igneous, sedimentary and
Metamorphic rocks. Origin of Himalayas major earth geological events through time scale. Origin of life,
types of fossils evolution of mammals & Man. Joints, Folds, Faults and structures.

iii)      Economic Geology, Ore Geology, Geochemistry : Origin, occurrence and distribution of
Economic mineral deposits-Iron, manganese, gold, zinc, graphite, lead, coal and petroleum deposits.
Ore-dressing, ore-reserves, estimation. Major elements, application in environmental studies REE-its
implication in genesis/ provenance of rocks.

iv)  Remote Sensing, Geophysics and Hydrogeology : Sensors & Platforms- Indian Remote Sensing
- Spectral system characterizes of rocks & minerals – Photogeology – Photogrametry – Hydrogeology -
Groundwater – occurrence, movement, Aquifer, field parameters & Lab methods of estimations.

v)    Engineering Geology, Environment Geology and Marine Geology : Engineering properties of
Rock. Geological investigation required for Dam, Tunnel, highways and building constructions.
Renewable and non-renewable resources, pollution. Continental and marine environmental studies.
Ocean features, physical, chemical & biological resources of the ocean.

3. MECHANICAL, AUTOMOBILE & AERONAUTICAL ENGINEERING

i)     Mechanics : Statics of Particles, Equilibrium of Rigid Bodies, Properties of Surfaces and Solids, Dynamics of
Particles, Friction and Elements of Rigid Body Dynamics – Basics of Mechanisms, Kinematics of Linkage Mechanisms,
Kinematics of Cam Mechanisms, Gears and Gear Trains, Friction, Force Analysis, Balancing and Vibration.

ii)    Strength of Materials and Design : Stress, Strain and Deformation of Solids, Transverse Loading on Beams
and Stresses in Beams, Deflection of Beams, Energy Principles, Thin cylinders and spherical resells Torsion -
Fundamentals of Design for Strength and Stiffness of Machine Members, Design of Shafts and Couplings, Design of
Fasteners and Welded Joints, Design of Springs and Engine Parts, Design of Engine parts, Bearings and Flywheels,
Design of Transmission Systems for Flexible Elements, Spur Gears and Parallel Axis Helical Gears, Bevel, Worm Gears
and Crossed Helical Gears, Design of Gear Boxes, Design of Cam, Clutches and Brakes.

iii)  Material Science and Metallurgy : Constitution of Alloys and Phase Diagrams, Heat Treatment, Ferrous and
Non ferrous Metals, Non-Metallic Materials, Mechanical Properties and Testing, Crystal Defects and Strengthening of
Materials Conducting and Semiconducting Materials, Magnetic and Dielectric Materials, Nuclear Physics,
Superconducting and New Engineering Materials.

iv)   Thermodynamics : Basic Concepts and First Law, Second Law, Entropy and Availability, Properties of Steam,
Psychrometry, Ideal and Real Gases and Thermodynamic Relations, Fuels and Combustion, – Gas Power Cycles,
Stream Turbines, Internal Combustion Engines, Internal Combustion Engines Testing and Performance, Gas
Turbines, – Steam Nozzle, Air Compressor, Refrigeration and Air-Conditioning, Boilers, Cogeneration and Waste Heat
Recovery.

v)    Heat Transfer : Conduction, Phase Change Heat Transfer and Heat Exchangers, Radiation, Mass Transfer-
Refrigeration Cycle, Refrigerants, System Components and Balancing, Psychrometry, Air Conditioning Systems,
Unconventional Refrigeration Cycles.

vi)   Production Technology : Foundry Technology, Hot & Cold Working, Forging, Advances in Forming Process,
Principles and Applications of Joining Processes, Theory of Metal Cutting, Centre Lathe and special Purpose Lathes,
Reciprocating Machines, Milling Machines and Gear Cutting, Abrasive Process, Broaching, CNC Machine Tools and
Part Programming.

vii)   Automotive Engines : Engine Construction and Operation, SI Engine Fuel System, Cooling and Lubrication
System, Combustion and Combustion Chambers, Two Stroke Engines, Diesel Engine Basic Theory, Fuel Injection
System, Air Motion, Combustion and Combustion Chambers, Supercharging and Turbocharging, Diesel Engine
Testing and Performance.

viii)    Automotive Transmission and Pollution : Clutch and Gear Box, Hydrodynamic Drive, Planetary Gear
Boxes, Automatic Transmission Applications, Hydrostatic and Electric Drive – S.I. Engine Combustion and Emissions,
CI Engine Combustion and Emissions, Control Techniques for Reduction of SI and CI Engine Emission, Test
Procedure & Instrumentation for Emission Measurement and Emission Standards.

ix)   Aerodynamics : Basic Fluid Mechanics, Two Dimensional Inviscid Incompressible Flow, Airfoil Theory, Subsonic
Wing Theory, Laminar and Turbulent Flow, Fundamental Aspects of Compressible Flow, Shock and Expansion Waves,
Two Dimensional compressible Flow, High Speed Flow Over Airfoils, Wings and Airplane Configuration.

x)       Aerospace Propulsion : Fundamentals of Gas Turbine Engines, Subsonic and Supersonic Inlets for Jet
Engines, Centrifugal and Axial Flow Compressors, Combustion Chambers for Jet Engines, Turbines for Jet Engines,
Nozzles for Jet Engines, Ramjet Propulsion, Hypersonic Airbreathing Propulsion, Chemical Rocket Propulsion,
Advanced Propulsion Techniques.

4. ELECTRICAL & ELECTRONICS ENGINEERING AND INSTRUMENTATION ENGINEERING

i)    Electrical Circuits and Fields : KCL, KVL, Nodal & Mesh analysis, transient response of D.C and A.C

networks; sinusoidal steady-state analysis; resonance in electrical circuits; concepts of ideal voltage and current sources, network theorems, driving point admittance and transfer functions of two port network, three phase circuits; Fourier series and its application; Gauss theorem, electric field intensity and potential due to point, line, plane and spherical charge distribution, dielectric, capacitance calculations for simple configurations; Ampere’s and Biot-Savart’s law, inductance calculations for simple configurations.

ii)   Electrical machines : Single phase transformer-equivalent circuit, phasor diagram, tests, regulation
and efficiency; three phase transformer-connections; auto transformer; principles of energy conversion,
windings of rotating machines: D.C generators and motors-characteristics, starting and speed control,
armature reaction and commutation; three phase induction motors-performance characteristics, starting
and speed control; single-phase induction motors; synchronous generators- performance, regulation;
synchronous motors-starting characteristics, applications, synchronous condensers; fractional horse
power motors; permanent magnet and stepper motors.

iii)         Power Systems : Electric power generation – thermal, hydro, nuclear; transmission line
parameters; steady-state performance of overhead transmission lines and cables and surge propagation;
distribution system, insulators, bundle conductors, corona and radio interferences effects; per-unit
quantities; bus admittance and impedence matrices; load flow; voltage control and power factor
correction; economic operation; symmetrical components, analysis of symmetrical and unsymmetrical
faults; principle of over current, differential and distance protections; concepts and solid state relays and
digital protection; circuit breakers; principles of system stability-swing curves and equal area criterion.

12 iv)     Control systems : Principles of feedback; transfer function; block diagram; steady-state errors;
stability-Routh and Nyquist criteria; Bode plots; compensation; root loci; elementary state variable
formulation; state transition matrix and response for Linear time Invariant systems.

v)        Power Electronics and Drives : Semiconductor power devices-diodes, transistors, thyristors,
triacs, GTO, MOSFETs and IGBTs-static characteristic and principles of operation; triggering circuits;
phase control rectifiers; bridge converters-fully controlled and half controlled; principles of choppers and
inverters, basic concepts of adjustable speed dc and ac drives.

vi)  Digital Electronics : Digital Logic Theory: Number systems-Combinational logic circuits-Minimization
of Boolean functions-IC families-Arithmetic circuits, Multiplexer & decoders-Sequential circuits-Flip flops,
counters, shift registers, Schmitt trigger, timers and multivibrators.

Microprocessor : General 8 bit microprocessor Architcture-8085, 8086 processor – Architecture, Memory, I/O interfacing, Instruction set, Addressing modes, Timing diagram & delays, Machine cycles, Interrupts, counters, Assembly language programming.

Microcontrollers: 8 bit microcontroller – 8051 architecture, bus configuration, Instruction sets, programming & applications.

vii)    Digital Signal Processing : Analog signals-sampling & Aliasing-Discrete time signals & systems-
LTI systems- Convolution sum-Difference equation representation-Z Transform & its Inverse-Discrete
Fourier series & Fourier transform-Radix 2 FFT – Decimation in me and frequency- Inverse DFT using
FFT-Analog Butterworth & Chebyshev filter design-IIR & FIR filter design and Realization.

viii)  Computer Control of Processes, Networks : State models and state equations-controllability &
observability-pole assignment-discrete data system – state space representation-stability-data hold, Z &
modified Z transform – Pulse transfer function-programmable logic controllers.

Data networks-switching OSI, Data link control, Media access protocol-BISYNC, SDLC, HDLC, CSMA/CD, TCP/IPBridges, routers, gateways, Ethernet and Arcnet configuration.

ix)     Communication Engineering : Modulation and demodulation systems – Types of transmission
lines – losses – standing waves – Ground wave and space wave propagation – Digital communication
concepts – Data Communication codes, serial and parallel interface – Network protocol – Types of
satellites – Advantages of optical fibre communication.

x)    Measurements, Instrumentation and Transducers : Measurement of R, L and C-Bridges,
potentiometers & galvanometers- Measurement of voltage, current, power, power factor and energy-
Instrument transformers, Q meter, Waveform Analyzers – Digital voltmeter, multimeter-Time, phase and
frequency measurements-Oscilloscope – display and recording devices – Noise and interference in
Instrumentation.

xi)  Industrial Instrumentation : Measurement of displacement, stress, strain, force, torque, velocity,
Acceleration, Shock, vibration, humidity, viscosity & density- Pressure, temperature, flow & level
measurement.

xii)          Analytical Instrumentation : Spectro Photometers-Spectral methods of analysis-source
detectors and applications – Ion conductivity-sampling systems, ion selective electrodes, conductivity and
pH meters- Analyzers – Chromatography – NMR & X ray spectroscopy – GM and proportional counters-
Mass spectrometer.

Units and standards-Calibration methods-Errors-Transducer classification, static characteristics, mathematical mode, zero, I and II order transducers – Response to different inputs-variable Resistance, Inductance and capacitance transducers-Piezo electric, Magnetostrictive, IC and smart sensors- Digital, Fibre optic, Hall effect and feedback transducers.

5. ELECTRONICS AND COMMUNICATION ENGINEERING

I.             Circuit Analysis: DC Circuit analysis, Thevenin’s and Norton’s equivalent circuits, Sinusoidal
steady state analysis, Transient and resonance in RLC circuits.

Electronic Devices: Diodes, Bipolar Junction Transistors, FET, MOSFET, UJT, Thyristor. Electronic Circuits: Small signal amplifiers using BJT and FET devices, Large signal amplifiers, Power supplies, Feed back amplifiers, Oscillators, Pulse shaping circuits. Digital Electronics: Logic gates, Combinational circuits, Sequential circuits. Linear Integrated Circuits: Operational amplifiers and its applications, PLL, Voltage regulators, A/D and D/A converters. Measurements and Instrumentation: Transducers, Digital Instruments, Display and Recording systems. Microprocessor and its applications: Microprocessors-8085 and 8086 architectures and interfaces, Micro-controller and applications.

1. Electromagnetic Fields: Static Electric and Magnetic fields, Time varying Electric and Magnetic fields, Maxwell equations. Transmission Lines and Networks: Transmission line equations, impedance matching, Filters. EM waves and waveguides: Guided waves, Rectangular and cylindrical waveguides. Antennas and Propagation: Aperture antennas, arrays, Propagation of radio waves. Microwave Engineering: Microwave tubes, semiconductor devices, Passive components, Microwave measurements.
2. Communication Theory and Systems: AM, FM and PM, Sampling and Quantization, PCM, DM, ADM, Multiplexing. Digital Communication: Base band signaling, Band pass signaling, Error control coding, Spread spectrum techniques. Computer Communication Networks: Definition of layers, data link protocols, Network interconnection. Message routing technologies, End-End protocols. Optical Communication: Optical Fibers, optical transmitters and receivers.
3. Signals and Systems: Continuous time signals and systems-Fourier Transform, Laplace transform, Discrete time signals and systems-DTFT, DFT, Z-Transform. Digital Signal Processing: IIR and FIR filters, Realization and implementation, Quantization effects. Control Systems: Transfer function, Time and frequency response analysis, Stability analysis, state variable analysis

6. PRODUCTION AND INDUSTRIAL ENGINEERING

i)         Basic Mechanisms and Elements of Design : Mechanisms, Friction, Gearing and Cams,
Balancing, Vibration, Fundamentals of Design, Design of Basic Machine Elements, Design of Mechanical
drives, Design of Automotive components, Recent Advances.

ii)    Casting, metal forming and metal joining processes : Casting Processes, Welding Processes,
Special Casting Processes, Testing of Castings & Weldments – Fundamentals of Metal Forming, Forging
and Rolling, Extrusion and Drawing Processes, Sheet Metal Forming Processes, Recent Advances,
Mechanisms, Friction, Gearing and Cams, Balancing, Vibration, Fundamentals of Design, Design of Basic
Machine Elements, Design of Mechanical drives, Design of Automotive components, Recent Advances.

iii)   Tool Engineering, Machine tool operation, Metrology and Inspection : Mechanics of Metal
Cutting, Tool Material, Tool Wear and Tool Life, Gear Manufacture, Concept & Programming of CNC
machines, Advanced CNC programming & Tooling – General Concepts of measurements, Linear and
Angular measurements, Measurement of Surface Finish Measuring Machines, Metrology of Screw Thread
& Gears, Computer Aided Inspection and Laser Metrology – Strength and rigidity of machine tool
structures, Slideways, Spindles and spindle supports, Machine Tool Dynamics.

iv)     Engineering Materials, and Computer Aided Manufacturing : Introduction and Constitution of
Alloys and Phase Diagrams, Heat Treatment, Ferrous and Non Ferrous Metals, Mechanical Properties and
Testing, Welding and Foundry Metallurgy, Manufacturing Processes for Plastic, Mechanical, Chemical and
Electro-chemical energy based processes, Electrical Energy based Waste Processes, Thermal Energy
Process, Rapid Prototyping and Rapid Tooling – polymer Matrix Composites, Metal Matrix Composites,
Ceramics Matrix Composites, Advances in Polymers & Composites.

v)     Product and Process Design, Design of Jigs and Fixtures and Press Tools : Computer Aided
Design, Computer Graphics Geometric Modelling, Product Design Concepts, Recent Advances, Process
Planning, Estimating, Costing and Elements of Cost, Analysis of Overhead Expenses, Estimation of Costs
for Forging, Casting and Welding, Estimation of Machining Time, Purpose Types and Functions Of Jigs
and Fixtures, Jigs, Fixtures, Press working Terminologies and Elements of dies and Strip Layout, Design
and Development of Dies.

vi)    Operations Research : Linear Programming, LP Extensions, Networks, Inventory Models, Dynamic
Programming, Decision Analysis, Game Theory, Waiting Line Models, Markov Processes.

vii)     Operations Management : Forecasting, Aggregate Planning, Capacity Management, Production
Activity Control, Estimation and Costing, Product Cost Estimation, Software Cost Estimation, Costing
Methods, Cost Analysis for Planning and Control.

viii)   Quality Control Reliability and Maintenance : Quality Concepts, Statistical Process Control,
Process Capability Analysis, Advanced Control Charts, Acceptance Sampling, Reliability Concepts, Failure
Data Modeling, Reliability Prediction and Modeling, Reliability Management, Risk Assessment,
Maintenance Concept, Maintenance Models, Maintenance Logistics, Total Production Maintenance, Fault
Diagnosis.

7. COMPUTER SCIENCE AND ENGINEERING AND INFORMATION TECHNOLOGY

i)     Applied Probability And Operations Research : Random Processes, Probability Distributions,
Queuing Models and Simulation, Testing of Hypothesis, Design of Experiments.

ii)   Discrete Mathematical Structures : Formal Language and Automata – Graph Theory.

iii)  Compiler Design : Optimization – Code Generation – Implementation – Principles of Programming
Languages – Programming Paradigms.

iv)  Operating Systems And System Software : Process Management, Storage Management, I/O
Systems, Design and Implementation of LINUX OS, assemblers, Loaders, Linkers, Macro Processors.

v)          Distributed Systems : Communication and Distributed Environment, Distributed Operating
Systems, Distributed Shared Memory, Protocols, Fault Tolerance and Distributed File Systems, Distributed
Object Based Systems.

vi)   Programming And Data Structures : Problem Solving Techniques, Trees, Hashing and Priority
Queues, Sorting, Graph, Heap Search.

vii)  Algorithm Analysis And Design Techniques : Dynamic Programming, Greedy Algorithms,
Advanced Algorithms, NP Completeness and Approximation Algorithms.

viii) Microprocessors And Microcontrollers – Computer Architecture And Organization : Digital
Fundamentals, Combinational Circuits, Synchronous and Asynchronous Sequential Circuits, Instruction Set
Architecture(RISC,CISC,ALU Design), Instruction Level Parallelism, Processing Unit and Pipelining,
Memory Organization.

ix)   Digital Signal Processing : FFT, Filter Design.

x)     Computer Networks : Data Communication Systems, Applications.

xi)           Database Management Systems : Relational Model, Database Design, Implementation
Techniques, Distributed Databases, Object Oriented Databases, Object Relational Databases, Data Mining
and Data Warehousing.

xii)        Software Engineering Methodologies : Software Product and Processes – Software
Requirements Management – Requirement Engineering, Elicitation, Analysis, Requirements Development
and Validation, Requirements Testing – Object Oriented Analysis And Design – Modular Design,
Architectural Design, User Interface Design, Real Time Software Design, System Design, Data acquisition
System – Software Testing And Quality Assurance – SQA Fundamentals, Quality Standards, Quality
Metrics, Software Testing Principles, Defects, Test Case Design Strategies, Software Quality and
reusability, Software Project Management, Software Cost Estimation, Function Point Models, Software
Configuration Management, Software Maintenance.

xiii)       Artificial Intelligence : Intelligent Agents, Search Strategies, Knowledge Representation,
Learning, Applications.

xiv)     Mobile Computing : Wireless Communication Fundamentals, Telecommunication Systems,
Wireless Networks.

xv)        Security In Computing : Program Security, Security in Operating Systems, Database and
Network Security, Scientific Computing, Information Coding Techniques, Cryptography, Network Security.

8. CHEMICAL ENGINEERING, CERAMIC TECHNOLOGY AND BIOTECHNOLOGY

i)    Fluid Mechanics and Particle Technology : Classification of fluids, flow patterns, manometry,
continuity equation, Navier-Stokes’ equation, Bernoulli equation, Dimensional analysis, Flow through
pipes, Boundary layer concepts, Flow through fixed and fluidized beds, pumps – classification affinity
laws, performance curves. Characteristics of solids, size analysis, Screening, Storage, Conveyance, Size
reduction, Classifier, Centrifuges, Cyclones. Filtration, Mixing and agitation.

ii)   Chemical Technology and Process Calculations : Gas calculations, Material balance and Energy
balance – Steady and unsteady state, Humidity and Saturation, Combustion, Thermo chemistry,

Role of Chemical Engineers in process industry, Cement, glass and ceramic industries, paper industry- Oil, soap, detergent industries, petroleum refining and petrochemicals- Polymer industry, Fertilizers, Food industry and other important process industries.

iii)  Thermodynamics and Kinetics : Laws of thermodynamics, PVT behavior of fluids, Thermodynamic
formulations, compression of fluids, Phase equilibria – Application of the correlation and prediction. Free
energy change and reaction equilibria. Refrigeration – principles, performance. Reaction rate – laws,
theories, analysis. Design of reactors, Factors affecting design, Thermal reactors and rates of heat
exchanges. Non-ideal reactors, Hetrogenous reactors and solid catalysts, Gas- solid catalytic reactors,
Gas- solid non-catalytic reactors, Gas-Liquid reactors.

iv)   Heat and Mass transfer : Modes of Heat transfer. Heat conduction- steady and unsteady state,
Natural and forced convection, Heat transfer to fluids with phase change, heat transfer coefficients,
evaporation, heat exchangers – design and construction.

Diffusion, Mass transfer coefficients, humidification, drying, absorption, distillation, extraction, leaching, crystallization, adsorption and ion exchange, analogies.

v)     Process Control and Computer Applications in Chemical Engineering : Open loop systems,
closed loop systems, Frequency response, Advanced control systems, Instrumentation. Application of
spread sheet packages in Chemical engineering, Process flow sheeting, Development of software for
design of equipments. Dynamic programming in Chemical engineering.

vi)          Organic and Surface Chemistry : Carbohydrates, Oils, Fats, and Waxes, Heterocyclic
compounds, proteins, dyes and dyeing, pharmaceutical chemistry. Adsorption – types, adsorption of
gases over solids, isotherms, applications, ion exchange, adsorption chromatography, Catalysis – types,
Equations.

vii)   Electro, Polymer and Corrosion Chemistry : Factors influencing Corrosion, types of corrosion,
corrosion control. Laws of migration of ions, conductometric titrations, advantages, galvanic cells,
reversible and irreversible cells, Standard electrodes, electrode potentials, electrochemical series, Nernst
equation. Polymeric materials, Teflon, polyamide, Nylon66, Kevlar, polyesters, polyethylene teryphthalate,
poly butylene tetra phthalate, polycarbonates, bakelite, reinforcement, composites. Introduction to
spectroscopic analysis, Molecular spectroscopy, IR, NMR, Mass Spectrometry.

viii) Environmental Pollution and Control : Various methods of reduction of pollution, types of
pollution, Air pollution – sources and effects- control techniques, Water pollution – sources and effects-
control techniques, Soil pollution – sources and effects- control techniques and Solid waste disposal.

ix)   Bioprocess Engineering : Analysis of STR, Analysis of other configurations, Bioreactor scale-up,
Modeling and simulation of Bioprocesses, Bioreactor considerations in Enzyme systems.

x)     Cell and Molecular biology : Cells, Cell lines, Cell culture, Cell Organelles and its functions, types
of Cell divisions, cell cycle and its regulation mechanism. Transport Mechanism (passive, Active, ATPase
pumps and Na+ /K+ pumps), Receptors, Signal Transduction, Models of Signal Amplification Secondary
messengers, Structure of Nucleic Acids, Replication, Transcription, Translation and DNA repair mechanism
in Prokaryotes and Eukaryotes. Promoters, Enhancers and Transcription factors. Genetic Codes and Lac &
trp operons.

xi)   Biochemistry and Microbiology : Structure, function and metabolism of Carbohydrates, lipids
Nucleic Acids and proteins. Enzymes and its mechanism. Electron Transport Chain system, High energy
compound and reducing equivalents. History of Microbiology, Classification of Microorganism, structural
organization and multiplication of Microorganism. Physical and Chemical control of Microorganisms,
Primary and Secondary metabolites and their applications.

xii)       Genetic Engineering : Genes, control of gene expression, Restriction enzymes, Vectors
(prokaryotic and Eukaryotic) construction of cDNA and genomic Library. Screening of DNA libraries, PCR,
RACE PCR, RAPD, RFLP, AFLP, Site directed mutagenesis, Methods of Nucleic acid sequencing. Cloning
vectors in plants, Transgenic and Knockout animals.

xiii) Immunology : Immune system, immunity, lymphoid organs, antigens, adjutants, types of immune
response. Activation and different ion of T-cells and B-Cells, Antibodies, Genes and generation of
diversity, monoclonal antibodies. MHC APC, regulation of T-cell and B-cell responses. Immunity to
viruses, Bacteria fungi and parasites, cytokines, complements, immunosuppression, allergy and
hypersensitivity. Vaccines, Transplantation, Tumor Immunology, Autoimmunity and Autoimmune
disorders.

xiv)  Bioinformatics : Search engines and algorithms, data management, data technology, biological
databases and their uses. Pair wise sequence alignment (local and global), multiple sequence alignment,
dot matrix, dynamic programming and Bayesian methods. BLAST, FASTA, machine learning and Hidden
Markov models. Phylogenetic tree analysis. Bimolecular and cellular computing, microarray analysis and
system Biology.

xv)   White wares, ceramic processing and fine ceramics : Quarrying of ceramic materials, size
reduction, mechanical separation, mixing and conveying, powder characterization, Classification of
whiteware products, heavy clayware, tests and quality control.

xvi)    Glass, Cement, Refractory and Ceramic coatings : Formation and Structure of glass,
preparation of glass batch, glass melting process, Special glasses, annealing, different types of
refractories, different types of cement, concrete, properties of cement and concrete.

9. TEXTILE TECHNOLOGY

i)     Fibre Science and Technology : Cotton varieties and their properties; silk – pre and post cocoon
operations; varieties of silk and their properties; varieties of wool and their properties; properties of other
natural fibres.

Production and properties of viscose rayon and other regenerated fibres.

Requirements of fibre forming polymers; structural principles of polymeric fibres; fluid flow during spinning; technology of melt, wet, dry, dry jet wet, liquid crystal and gel spinning of polymeric fibres. Production, properties and applications of PET polyester, nylon 6, nylon 66, polyacrylonitrile and polypropylene.

Spin finishes; drawing; heat setting; crimping and texturisation; tow to top converters and tow to staple converters.

Structural investigation of fibres; study of moisture absorption, tensile behaviour, torsional rigidity and flexural rigidity, and optical, frictional, electrical and thermal properties of fibres.

ii)    Yarn Engineering : Yarn numbering systems- direct, indirect and conversions.

Description and working of short staple spinning machinery – blow-room machinery, card, comber preparatory machines, comber, draw-frame, speed-frame, ring-frame; calculation of process parameters and process efficiencies; production calculations.

Methods of mixing and blending; two-folding of yarns; two for one twist principle; man-made fibre processing.

Principle and details of yarn formation in condensed yarn spinning, rotor spinning, friction spinning, air-jet spinning and other new spinning systems; structure of yarns produced from different spinning systems. Control of waste, productivity and quality.

iii)     Fabric Engineering : Fundamental concepts in winding, modern automatic winders; yarn clearing;
winding synthetic and blended yarns and sewing threads; weft winding; Creels used in warping
machines; beam and sectional warping machines; Sizing materials and recipes: size preparation and
application; control systems used in sizing machine; sizing filament yarns; combined dyeing and sizing;
energy conservation in sizing; process control in weaving preparation; preparation of warp beam for
weaving.

Yarns quality requirements and preparations for high speed weaving machines.

Principles and limitations of various shedding, picking mechanisms; power required for picking; timing different mechanisms; automation and modern developments in weaving machine; cloth formation; loom accessories; process control in weaving.

Cloth geometry; cover factor; concepts in fundamental and advanced woven fabric designs.

Quality and preparation of yarn required for knitting; basic weft knitted structures and their production;

needle control in weft knitting machines; factors affecting the formation of loop; effect of loop length and

shape on fabric properties; process control in knitting; warp knitting fundamentals.

Web forming techniques for dry method of web preparation; production of bonded fabrics by mechanical,

chemical and thermal methods; productions of spun bonded and melt blown fabrics; end uses of bonded

fabrics.

iv)       Chemical Processing : Chemical structure and chemical properties of natural and man-made
fibres; singeing; desizing; scouring; bio preparatory operations; Mercerization; bleaching; heat setting;
processing machines.

Adsorption isotherms; dye-fibre interaction; properties and application of direct, azoic, vat, sulphur, reactive, acid, mordant, metal-complex, disperse and basic dyes; dyeing of blends; garment dyeing; assessment of colour fastness.

Fundamentals of colour measurement; whiteness and yellowness indices; colour matching; spectrophotometers.

Methods and styles of printing; printing machines; printing paste; printing with direct, reactive, acid and disperse dyes and pigments.

Calendering; crease proofing; anti-shrinking; softening; felting and non-felting of wool; bio-polishing; assessment of finishes; assessment of eco-friendliness of textiles; finishing of knits; garment washing.

v) Quality Evaluation : Textile quality parameters; online and off line testing methods. Measurement of length and length uniformity, fineness, strength, maturity, trash content, moisture content of fibres using conventional and modern testing methods; advanced fibre information systems, high volume testing; measurement of lap, sliver and roving irregularity.

Assessment of count, twist, hairiness, strength and extension, evenness, imperfection, friction, crimp rigidity, work of rupture, fatigue, abrasion resistance of yarn; classification of yarn faults. Determination of fabric construction parameters; assessment of tensile, bursting and tear strengths, low-stress mechanical properties, permeability, insulation properties, durability, comfort and handle properties of fabrics; grading of fabrics based on defects. Sampling; statistical significance tests; control charts.

10. LEATHER TECHNOLOGY

i)      Pre Tanning Operations : Hides & Skins – Histological characteristics structure of hides & skins
defects – curing & preservation methods – Animal by products – soaking, unhairing, liming, deliming,
bating, pickling, depickling and degreasing- Their objectives & principles involved. Biochemistry of
collagen and other substances – chemicals & auxiliaries used in pre-tanning operations – General
pretanning processes for manufacture of different types of heavy and light leathers – Process control in
pretanning – Ecofriendly pretanning operations – Physical and chemical testing – Standards and quality
control measures in pretanning. By products of animal and tannery operations.

ii)    Tanning Operations : Tanning materials – Vegetable, mineral and organic – their classification -
chemistry & Technology of tanning materials & methods – characterization manufacture & analysis of
various tanning materials. Theory & mechanism of vegetable, chrome, Aluminium, Zirconium, Iron,
Titarium, Aldehyde, Oil and other organic tanning. Various unit operations involved in tanning processes
their objectives & principles – cleaner processing options – Analysis & characterization of various types of
leathers – Physical and chemical testing – Standards and quality control measures in tanning operations.

iii)      Post Tanning and Finishing Operations : Retanning, dyeing – fatliquoring and finishing
operations – Their objectives & principles – chemicals used for the above unit operations – Syntans,
fatliquors, dyes, dye-auxiliaries, pigments, acrylic and protein binders, wax emulsion, fillers, topcoats, NC,
CAB lacquers and lacquer emulsions, feel modifiers, their nature & properties in finishing – machinery &
methods for post tanning and finishing operations – upgradation methods – chemical and physical
properties required for various finished leathers – physical & chemical testing of finished leathers -
Tannery Effluent treatment -Effluent treatment plant – Liquid and solid waste management.

iv)    Leathers & Leather Products : Various types of leathers – upper, sole, garment, leather goods,
sports & specially leathers – their characteristics. Leather supplement and synthetics – Design &
manufacture of footwear, leather goods & garments. Leather Economics and Industrial Management -
Project feasibility reports – organization & management of leather sector – marketing & export of leather
& products – Machines for leather products manufacture – mechanics & operation – IT applications for
leather & product design. Professional Ethics and human values.

11. ARCHITECTURE

i)      Building Materials, Construction and Technology : Lime, Brick, Stone, Clay products; Timber,
Industrial timber; Paints and varnishes, Concrete, Special concrete and light weight concrete; Ferrous
metals; non ferrous metals; Glass; Plastics; Eco friendly materials; Thermal insulation materials and
acoustic materials. Construction techniques and practices using the above listed materials; Damp and
water proofing; Pest control;; Construction systems and equipment; Pre- stressed concrete and Tensile
Structures; Grids domes; folded plates; Flat Slabs. Low cost construction & appropriate technologies.

ii)      History of Architecture : Indian architecture- Hindu and Islamic; Indo Saracenic; Secular
architecture of the princely states; Colonial and Post Independence Architecture; Works of masters such
as Charles Correa; B V Doshi; Ananth Raje; Raj Rewal; Laurie Baker; Nari Gandhi; Kanvinde.
Western architecture- Ancient Greek and Rome; Early Christian; Gothic and Renaissance; Baroque; Neo
Classicism; Chicago School and development of skyscraper; Modern architecture: Art and Crafts; Art

Noveau; Expressionism and Cubism; Bauhaus; International style; Post Modernism and De constructivism; Critical Regionalism; Theories and projects of F L Wright; Le Corbusier; Gaudi; Gropius; Aalto; Mies; Eisenmann; Zaha Hadid; Soleri; Hasan Fathy; Ando; Bawa; Gehry; Libeskind; Toyo Ito; Louis Khan; Tschumi; Greg Lynn; Assymptote.

iii)    Theory and principles of architecture : Elements and ordering principles; Organisation of form
and space; Design methodology and Creative thinking; Pattern language; Contemporary process:
Diagrams, Shape grammar, fractals, Digital hybrid, Liquid architecture.

iv)     Building Services : Water supply and distribution systems; water and waste management;
Sewerage system; Electrical systems; Illumination and lighting; Air conditioning; Fire Safety; building
automation and IBMS.

v)      Building Science : Climate responsive architecture; design of solar shading devices; acoustics &
building design; Architecture & Energy- Active & passive solar architecture, Day lighting & natural
ventilation, Landscape designs; Landscape & environment control.

vi)     Housing; Urban Design and Town Planning : National Housing Policy; Indra Awas Yogana;
Housing standards; housing projects in India; Urban morphology of early and contemporary cities; Case
Studies on urban revitalization from developed and developed economies; Planning concepts- Patrick
Geddes, Ebeneezer Howard, Le Corbusier, C A Perry; Urban planning, regional planning and Urban
renewal in the Indian context.

12. PHYSICS AND MATERIAL SCIENCE

i)     Mechanics, Heat and Sound : Vectors – equilibrium – moment of a force – Newton’s laws of
motion – gravitation – work – energy – power – Impulse and momentum – collitions – recoil.
Thermometry of thermal expansion – calorimetry and specific heats – transfer for heat – thermal process
of matter – Law and processes of thermodynamics – Applications. Travelling waves – oscillations – spring
- simple pendulum – forced oscillations – resonance – sound waves -Acoustic Phenomena and its
applications- Doppler effect.

ii)    Light and Properties of matter : The nature and propagation of light – reflection of refraction at
plane surfaces – interference – diffraction – polarization. Elasticity – Stress-strain diagram –
hydrostatics – Pressure in a fluid – Pumps – Archimede’s principle – Surface tension – Contact angle -
Capillarity – hydrodynamics – Bernoulli’s equation – Applications and viscosity – Poiseuille’s law -
Stokes law – Reynolds number.

iii)   Electricity and Magnetism : Coloumb’s law – Gauss’s law – Applications – electrostatic potential -
capacitors – dielectrics – current – resistance – emf – Kirchoff’s law – thermo electric effect – applications.
Magnetism – magnetic effects of current – motion of charge particles in magnetic field – cyclotron -
magnetic forces on current carrying conductor – Hall effect – electromagnetic induction -Faraday’s law -
Lenz’s law – eddy current – Inductance – mutual and self inductance – magnetic properties of matters -
diamagnetism – paramagnetism – ferromagnetism – domains- Hysteresis – alternating current – circuits
containing resistance, inductance or capacitance – transformer.

iv)   Modern physics : Emission and absorption of light – thermionic emission – photoelectric effect -
atomic spectra – atom models – molecular spectra – dual nature of matter and radiation – nuclear
structure – properties – natural radioactivity – nuclear stability – nuclear reactions – fission – fusion -
fundamental particles – high energy physics.

v)    Solid State Electronics : Structure and bonding in solids – properties of solids – semiconductors -
intrinsic – extrinsic – PN junction – diode characteristics – Zenar diode – LED, laser diode – Photodiode -
Transistor – action and characteristics – amplifier – oscillator – basic logic gates.

vi)     Electron theory of solids: Classical free electron theory – density of states- electron in a periodic
potential – origin of energy band gap – electrical conductivity – thermal conductivity – Widemann-Franz
law
vii)    Dielectric and magnetic materials: Different types of polarization – Internal field – Clausius-
Mosotti equation- dielectric breakdown- applications of dielectric materials – Different types of magnetic
materials – domain theory of ferromagnetism – hysteresis – hard and soft magnetic materials-
applications of magnetic materials.

viii)   Superconducting materials: General properties of superconducting materials – Meissner effect
- types of superconductors – Hi Tc superconductors- applications

ix)     Nanomaterials: Preparation – properties – applications – Carbon nanotubes.

13 – MATHEMATICS

(i)           Algebra

Algebra:   Group, subgroups, Normal subgroups, Quotient Groups, Homomorphisms, Cyclic Groups, permutation Groups, Cayley’s Theorem, Rings, Ideals, Integral Domains, Fields, Polynomial Rings. Linear Algebra:  Finite dimensional vector spaces, Linear transformations – Finite dimensional inner product spaces, self-adjoint and Normal linear operations, spectral theorem, Quadratic forms.

(ii)          Analysis

Real Analysis: Sequences and series of functions, uniform convergence, power series, Fourier series, functions of several variables, maxima, minima, multiple integrals, line, surface and volume integrals, theorems of Green, Strokes and Gauss; metric spaces, completeness, Weierstrass approximation theorem, compactness.

Complex Analysis: Analytic functions, conformal mappings, bilinear transformations, complex integration: Cauchy’s integral theorem and formula, Taylor and Laurent’s series, residue theorem and applications for evaluating real integrals.

(iii)        Topology and Functional Analysis

Topology: Basic concepts of topology, product topology, connectedness, compactness, countability and separation axioms, Urysohn’s Lemma, Tietze extension theorem, metrization theorems, Tychonoff theorem on compactness of product spaces.

Functional Analysis: Banach spaces, Hahn-Banach theorems, open mapping and closed graph theorems, principle of uniform boundedness; Hilbert spaces, orthonormal sets, Riesz representation theorem, self-adjoint, unitary and normal linear operators on Hilbert Spaces.

(iv)         Differential and integral Equations

Ordinary Differential Equations: First order ordinary differential equations, existence and uniqueness theorems, systems of linear first order ordinary differential equations, linear ordinary differential equations of higher order with constant coefficients; linear second order ordinary differential equations with variable coefficients, method of Laplace transforms for solving ordinary differential equations.

Partial Differential Equations: Linear and quasilinear first order partial differential equations, method of characteristics; second order linear equations in two variables and their classification; Cauchy, Dirichlet and Neumann problems, Green’s functions; solutions of Laplace, wave and diffusion equations using Fourier series and transform methods.

Calculus of Variations and Integral Equations: Variational problems with fixed boundaries; sufficient conditions for extremum, Linear integral equations of Fredholm and Volterra type, their iterative solutions, Fredholm alternative.

Statistics: Testing of hypotheses: standard parametric tests based on normal, chisquare, t and F-distributions.

Linear Programming: Linear programming problem and its formulation, graphical method, basic feasible solution, simplex method, big-M and two phase methods. Dual problem and duality theorems, dual simplex method. Balanced and unbalanced transportation problems, unimodular property and u-v method for solving transportation problems. Hungarian method for solving assignment problems.

14. SOCIAL SCIENCES

i)    Geography : Settlement geography-rank-size relationship, urban environment- physical and social,
regional delimitation, central place theory, urbanization in India and Tamilnadu, relationship, concept and
types of region, regional development planning in India, globalization and economics reforms and
competitiveness.

ii)   Sociology : Social institution, society, community, social roles, norms, status, values, social structure
in India, social change and its relevance to economic development, urbanization as a way of life, social
problems of developed and developing countries, impact of urbanization on society and rural
development, impact of IT industry on society and development.

iii)     Economics : Agglomeration economics- internal, external and urbanization economics, economic
base of cities- meaning, types of economic base and methods of identifying economic base, multiplier
concept, and approaches of development, Indian national economy -five year plans, environmental
economics, economic geography of India. Land economics and industrialization policy, SEZs, IT, ITES
industries

iv)     Social work : Role of social worker and NGO’s in development – community, rural, social, and
national level; public participation in developmental framework- city, regional, and national level,
awareness programme on policies, counseling- rational emotive therapy, behavior modification therapy,
family counseling, group work- treatment group, task group, community work- rural and urban
community developments/micro credit/micro finance\SHGs